COMPACT TABLEAU INSTALLATION SOLUTION
Air Purifier S30 DS
The Air Purifier S30 DS is a completely self-sufficient unit for installation in elevator cars, etc. and normally requires no operation. Depending on the operating mode, it works permanently around the clock or switches on in automatic mode for 15 minutes at a time when the car is entered. In this operating mode, a sensitivity for the triggering function can be set during commissioning.
MIRRORED IRRADIATION CHAMBER AND HIGH POWER LIGHT SOURCE FOR MAXIMUM DISINFECTION PERFORMANCE
The AIR PURIFIER S30 is a certified UV-C aerosol disinfection device for elevators. Once sucked in, viruses, bacteria, germs and co. have no chance to survive. The AIR PURIFIER S30, tested and certified by an accredited laboratory, can be easily installed in the panel or wall panels. The air inlets and outlets can be flexibly positioned in the panels, in the tableau and/or on the cabin roof. The AIR PURIFIER S30 communicates the current operating status via different LED colors. A blue pulsating LED signals the correct working mode of the unit by an illuminated "inhale". The UV-C unit is located in a specially manufactured tunnel and irradiates the "inhaled" aerosols with an effectiveness of >99.99. After a radiation dose of > 50.5 mJ/cm², the inactivated ("killed") viruses, bacteria, germs, fungi, yeasts are "exhaled" back into the room through the outlet opening. The entire housing is riveted "light-tight". Thus, no UV-C residual radiation escapes from the housing and there is no health risk for humans and animals.
Dimensions | |
Weight | 3 kg |
Electrical data | |
Supply voltage (AC) | 230 V |
Frequency | 50/60 Hz |
Power consumption | 75 W in operation; < 0.5 W in standby |
Air power | 30 m³/h |