AQ 37 Q - Acoustic acknowledgement

Description
Specifications

The AQ can be operated in 3-wire as well as 4-wire technology in such a way that it only triggers when the call has been accepted by the control unit. The AQ is also triggered when an already acknowledged command transmitter is actuated (see EN 81-70 (D) table 4). The volume can be adjusted via potentiometer.

Using the AQ reduces the voltage with which the control is called. With an input current of 10 mA with the AQ 37 by 1.7 V. If this causes problems, use the AQ 37 FST. Here, the call voltage is reduced by typ. 1.4 V at an input current of 10 mA.

Order no.	Designation
1004228	AQ 37 Q housing black
1004229	AQ 37 Q housing grey
1004232	AQ 37 R housing black
1004233	AQ 37 R housing grey
1004573	AQ 37 HP without housing for mounting behind the faceplate with hole pattern LB 23 R
1004274	AQ 37 Q FST housing black
1004275	AQ 37 Q FST housing grey
1004280	AQ 37 R FST housing black
1004281	AQ 37 R FST housing grey
1004578	AQ 37 HP FST without housing for mounting behind the faceplate with hole pattern LB 23 R
1003590	EP 37 Decoupling PCB. For use with the AQ 37 in 4-wire technology with 1M pushbuttons.
017915	Push-in 3p
015878	IDC 3p

Fixing
clamped	X
Faceplate thickness	0.5 - 2 mm
Installation depth	10 mm
Connectivity
Cutting terminal 3 poles (option)	AWG 24 - 26
Push-In terminal 3 poles (option)	AWG 20 - 26
Electrical data
Power supply	12 - 30 V DC
Stand-by current	12 mA
Operating current	250 mA
Polarity
Common anode or common cathode	X
Acoustic properties
Sound pressure (0.3 m distance)	90 dB(A) not built in; 85 dB(A) built in
Volume adjustable via a potentiometer	X
Other
Temperature range	0 - +65 °C

Wiring

Connection diagrams

3-wire technology, standard compliant, common anode

The acknowledgement signal of the control unit must not exceed 1 V. The call signal is max. 1.7 V (1.4 V with AQ FST) with an input current of 10 mA.

3-wire technology, standard compliant, common cathode

The acknowledgement signal of the control unit must not be more than 1 V below the supply voltage. The call signal is max. 1.7 V (1.4 V for AQ FST) below the supply voltage at an input current of 10 mA.

4-wire technology, standard compliant, common anode

4-wire technology, standard compliant, common cathode

In the following schemes, only the acoustic acknowledgement of the command (not the command acceptance) is possible. The AQ therefore sounds with every actuation, even if the command is not acknowledged. The call lines of the pushbuttons are connected in parallel with the acoustic acknowledgement (AQ) via diodes (decoupling circuit or EP 37).