Menu
Your Cart

Accessories

 

Part number: 262
The Connector is used for connecting SCHAEFER displays having female Micro-Match connectors. Description Order number Connector incl. Micro-Match cable 10 poles, 250 mm 008812..
Brand: SCHAEFER Part number: 015260
Configuration and simulation kit for DMD 16x16 / 27 / 30 / 35 / 50. System requirements MS Windows® XP/Vista/7/8/10 MS .NET Framework 4 Client Profile min. 256 MB RAM Resolution of at least 1024 × 768 pixel USB-interface..
Part number: 137
Software for configuration of DVM 70 / DVM 70 V2.0. System requirements MS Windows® XP/Vista/7/8/10 MS .NET Framework 3.5 min. 256 MB RAM Resolution min. 1024 × 768 pixel DVD drive..
Part number: 138
Different signals of the controller can be simulated with the simulation kit. Via the 16 switches of the switch box, the signals can be driven with common cathode or anode. The contacting is carried out in a time-saving manner via spring pins. The DVM 70 simulation kit contains a power supply, a swi..
Part number: 260
The encoder is required for control 1 out of n for displays that are designed for binary code. The encoder converts 1 of n into dual code. Description Order number Encoder 1 out of 15 common anode incl. Micro-Match cable 10 poles, 250 mm ..
Part number: 261
The Encoder 1 out of 31 is needed with the SM 84 for reproduction of 16 up to 31 announcements with control 1 out of n. The Encoder converts 1 out of n signals to dual code...
Part number: 264
An impulse converter can be added to a SCHAEFER display. It  converts serial pulses to dual code...
Part number: 124
Speaker 42 is a Loudspeaker that can be connected to different SCHAEFER products...
Part number: 125
The PG 56 will create 1, 2 or 3 tones once a signal is at the input. The polarity (common anode or cathode) can be adjusted via a jumper. The volume can be adjusted via a potentiometer and the tone pitch can be adjusted via a tact switch...
Part number: 203
The Speaker 56 (50 Ohm) is suitable for products that require a high-impedance speaker. It has an impedance of 50 ohms...
Part number: 136
Structure-borne noise converter for installation behind closed surfaces for protection against spary water and vandalism...
Part number: 135
Auxiliary loudspeaker for higher output rating and improved playback quality...
Part number: 372
Transponders with key function are available in four variants:ISO-Card “KeyCard”key ring pendant “KeyTag”key ring pendant “BlueTag”key ring pendant “StrongTag”All four variants have identical functions. Every transponder (electronic key) is a unique specimen with a non-recurring and unchangeable ide..
Part number: 263
The Uni-Wandler is a universal converter which can be combined for example with the acoustic systems or with the displays...
Part number: 201
VEBUS A1 is a general universal converter card for various bus interfaces. It was especially optimised for applications in lifts (max. 32 floors). It converts typical dual control signals to RS-485 compatible serial control signals...
Brand: theben Part number: 1004127
https://www.theben.de/en/antenna-rc-dcf-9070410..
Part number: 1005457
Lines with open ends, coming from the lift controller, can be connected via the connection adapters TFT F P 8p/10p (8 poles/10 poles) to the TFT F P (parallel). The PCBs can be mounted using adhesive tape. Due to the low installation depth of the PCBs, the connection adapters TFT F P 8p/10p are also..
Part number: 1005456
Lines with open ends, coming from the lift controller, can be connected via the connection adapters TFT F P 8p/10p (8 poles/10 poles) to the TFT F P (parallel). The PCBs can be mounted using adhesive tape. Due to the low installation depth of the PCBs, the connection adapters TFT F P 8p/10p are also..
Part number: DC-Entkoppler
The DC Decoupler is connected upstream the Rainbow Button type RB 42 2M XI. In normal operation, the emergency call button thus runs via the standard power supply. In case of a power failure the emergency call button will be fed via the emergency power supply.For the permanent display of elevator da..
Part number: DC-Entkoppler F
The DC Decoupler is connected upstream the Rainbow Button type RB 42 2M XI. In normal operation, the emergency call button thus runs via the standard power supply. In case of a power failure the emergency call button will be fed via the emergency power supply. For the permanent display of elevator ..
Brand: theben Part number: 1004126
https://www.theben.de/en/tr-611-top3-rc-6110330..
Part number: MCODE-5839721046
The Encoder 1 out of 15 is needed with the SM 84 for reproduction of 7 up to 15 announcements with control 1 out of n.The Encoder converts 1 out of n singlas to dual code...
Brand: SCHAEFER Part number: 1000047
For MFD 332 S, MFD 332 P, MFD 544 S and MFD 544 P...
Part number: HQ 56
Structure-borne noise converter for haptic acknowledgement...
Brand: SCHAEFER Part number: 004289
With help of the insertion tool that allows the flexible braided wire easily and comfortably into the socket of the insulation displacement connector, to be pressed in the installation element itself.Only for plugs:Connector 2p AWG 26-28 (003215)Connector 3p AWG 26-28 (011007)Connector 4p ..
Part number: KeyCard
Transponders with key function are available in four variants:ISO-Card “KeyCard”key ring pendant “KeyTag”key ring pendant “BlueTag”key ring pendant “StrongTag”All four variants have identical functions. Every transponder (electronic key) is a unique specimen with a non-recurring and unchangeable ide..
Part number: LCD/TFT Simulations Kit
Different signals of an elevator controller board can be simulated with the simulation kit. The signals are driven via the 16 switches of the box with common cathode or anode.The LCD/TFT simulation kit contains:Power supplySwitch boxLCD/TFT cable setThe kit is suitable fort he following displays by ..
Part number: LED 99
The auxiliary module LED 99 is needed, when no display is integrated respectively if MFD 99 VIII is employed as full-size luminous field. The module is installed instead of the display...
Part number: LED 99 EL
The auxiliary module LED 99 EL is needed, when no display is integrated respectively if MFD 99 VIII is employed as full-size luminous field or emergency light according to EN 81-20. The module is installed instead of the display...
Part number: MCODE-8569214730
Magnet switch for retrofitting a position indicator according to EN 81-70. Ideally suited for modernisation of installations with lift controllers that do not have an output of floor signals. The function at one glance: At each stop in the shaft, magnets are being positioned. The magnet switch ..
R28 COB LED Module R28 COB LED Module
Coming soon
Part number: MCODE-9483612057
..
R40 COB LED Module R40 COB LED Module
Coming soon
Part number: MCODE-5314897602
..
Part number: MCODE-0641328957
Auxiliary loudspeaker for higher output rating and improved playback Quality...
T60 COB LED Module T60 COB LED Module
Coming soon
Part number: MCODE-1368759042
..
Part number: TFT Config Kit
Configuration kit for TFT-Displays. System requirements MS Windows® XP/Vista/7/8/10 MS .NET Framework 4.5 min. 2 GB RAM Resolution of at least 1280 × 960 pixel Administration rights DVD drive USB-interface (until Windows® 8) SD card reader (for Windows® 10) TFT Wizard (2.69 MB, zip) D..
Part number: TFT Config Kit (TFT 480, TFT 640, TFT 800)
Configuration kit for TFT-Displays: TFT 480, TFT 640, TFT 800.   System requirements MS Windows® XP/Vista/7/8/10 MS .NET Framework 2.0 min. 256 MB RAM Resolution of at least 1024 × 768 pixel DVD drive USB-interface..
Part number: MCODE-1942365087
Using a Touch Magnet Pen, the TFT 3.2", TFT 4.3", TFT 5.6" and TFT 7" can be configured when installed. The control, time, buzzer, standby on/off, etc. can be configured here...
Part number: Transponder BlueTag
Transponders with key function are available in four variants:ISO-Card “KeyCard”key ring pendant “KeyTag”key ring pendant “BlueTag”key ring pendant “StrongTag”All four variants have identical functions. Every transponder (electronic key) is a unique specimen with a non-recurring and unchangeable ide..
Part number: Transponder StrongTag
Transponders with key function are available in four variants:ISO-Card “KeyCard”key ring pendant “KeyTag”key ring pendant “BlueTag”key ring pendant “StrongTag”All four variants have identical functions. Every transponder (electronic key) is a unique specimen with a non-recurring and unchangeable ide..
Showing 1 to 40 of 40 (1 Pages)