IF Triple is employed for fixture pre-wiring. The entire fixture can be supplied via D-Sub connectors. Many controller-specific pin assignments are realized; apart from that, D-Sub cables with “open ends” can be supplied. IF 99 comes with female connectors type MicroMatch for ten stops and five special buttons. One DMD and MFD 99 can also be connected.
In addition, IF 99 Triple comes with an emergency light, low current pictograms and overload indicator. An AQ IC module may be attached to serve as acoustic button acknowledgement.
Fixing | |
Welding studs | M3 × 12 |
Faceplate thickness | 2 mm / 3 mm |
Connectivity | |
MicroMatch | AWG 28 |
Screw terminal | 0,1 - 1,5 mm² |
D-sub-plug (25-pole) | X |
D-sub-plug (37-pole) | X |
Control | |
3-wire technology | X |
Polarity | |
Common anode or common cathode | X |
Recall light pictograms | |
LED (white) | X |
U | 3 - 30 V DC |
I | 2.5 mA |
Recall light overload | |
LED (white) | X |
U | 12 - 30 V DC |
I | 20 mA |
Recall light emergency light | |
LED (white) | X |
U | 12 - 30 V DC |
I | 120 mA |
Buzzer | |
Buzzer | X |
U | 12 - 30 V DC |
I | 10 mA |
Pane | |
Pane thickness | 2 mm / 3 mm |
Pane (crystal clear) | F 9999 |
Compliance | |
EN 81-70 | X |
EN 81-71 Class 1 | F 9999 CVG |
EN 81-71 Class 2 | F 9999 CVG |
EN 81-72 | F 9999 wg |