Menu
Your Cart

Components

Part number: 361
..
Part number: 359
Direction Indicatior (DAW 70 V2.0) Installation compatible with previous version Reduced installation depth Horizontal or vertical installation possible Bright area illumination with COB LED Optional with buzzer..
Part number: 176
Dot Matrix Display with 26.5 mm height of characters...
Part number: 180
Dot matrix display with 30 mm height of characters...
Part number: 178
Dot matrix display with 30 mm height of characters...
Part number: 177
Dot matrix display with 30 mm height of characters...
Part number: 179
Dot matrix display with 30 mm height of characters...
Part number: 181
Dot matrix display with 30 mm height of characters...
Part number: 185
Dot matrix display with 35 mm height of characters...
Part number: 183
Dot matrix display with 35 mm height of characters...
Part number: 182
Dot matrix display with 35 mm height of characters...
Part number: 184
Dot matrix display with 35 mm height of characters...
Part number: 186
Dot matrix display with 35 mm height of characters...
Part number: 191
Modular dot matrix display with 50 mm height of characters...
Part number: 189
Modular dot matrix display with 50 mm height of characters...
Part number: 187
Modular dot matrix display with 50 mm height of characters...
Part number: 134
Universal voice announcement devide to announce floor information and special information. The device has 2 internal loudspeakers, stereo output and 14 inputs, 13 of these are freely configurable. Background musik can be played...
Part number: 343
The hands-free speakerphone EA-LMK70B serves as loudspeaker-microphone combination in the car fixture. It is equipped with a connection to the power supply of the system and a connection for the emergency call button. It is also possible to connect the techhnical alarm and/or the pictograms accordin..
Part number: 342
The remote emergency call system Easy-Alarm consists of the basic device Easy-Alarm EA-8-DPX _ and the hands-free speakerphone EA-LMK70B. The automatic dialling and announcing device Easy-Alarm is connected to an analogue telephone line. The system is available in three variants: EasyAlarm Elev..
Part number: 338
F-H uni and F-H2 uni are simple analogue communication systems for establishment of communications. The system consists of a handset fot the machine room or the porter's lodge and a hands-free speakerphone LMK-F which is installed in the lift car. The simple caraint F-H uni consists of one handset a..
Part number: 340
The handset is equipped with a loudspeaker and a microphone on the inside.By lifting of the handset a communication will be established to the car immediately. This communication will be terminated by hanging up the handset. If two handsets are used (F-H2 uni), both of them serve for establishing a ..
Part number: 351
Combination pane colour / LED colour..
Part number: 350
Combination pane colour / LED colour..
Part number: 349
Combination pane colour / LED colour..
Part number: 348
Combination pane colour / LED colour..
Part number: 352
Combination pane colour / LED colour..
Part number: 354
Combination pane colour / LED colour..
Part number: LP 15 W
..
Part number: 346
Combination pane colour / LED colour..
Part number: 355
Combination pane colour / LED colour..
Part number: 359
Out of Service Indicator (OSI 70 V2.0) Installation compatible with previous version Reduced installation depth Horizontal or vertical installation possible Bright area illumination with COB LED Optional with buzzer..
Part number: 344
..
Part number: 174
Dot Matrix Display with 35 mm height of characters and 40 mm height of arrows...
Part number: 345
..
Part number: 175
Dot Matrix Display with 35 mm height of characters...
Part number: 126
The PG 42 will create 1, 2 or 3 tones once a signal is at the input. The polarity (common anode or cathode) can be adjusted via a jumper. Volume and tone pitch can be adjusted via tact switch...
Part number: 127
The PG 56 will create 1, 2 or 3 tones once a signal is at the input. The polarity (common anode or cathode) can ve adjusted via a jumper. Volume and tone pitch can be adjusted via tact switch...
Part number: PP 4848 LED
Combination pane colour / LED colour..
Part number: 124
Speaker 42 is a Loudspeaker that can be connected to different SCHAEFER products...
Part number: 125
The PG 56 will create 1, 2 or 3 tones once a signal is at the input. The polarity (common anode or cathode) can be adjusted via a jumper. The volume can be adjusted via a potentiometer and the tone pitch can be adjusted via a tact switch...
Part number: 203
The Speaker 56 (50 Ohm) is suitable for products that require a high-impedance speaker. It has an impedance of 50 ohms...
Part number: 136
Structure-borne noise converter for installation behind closed surfaces for protection against spary water and vandalism...
Part number: 135
Auxiliary loudspeaker for higher output rating and improved playback quality...
Part number: 207
TFT-Display (thin-film-transistor) with high graphical resolution...
Showing 1 to 50 of 133 (3 Pages)