Modular dot matrix display with 50 mm height of characters.
Fixing | |
Clip fixing | X |
Welding studs | M3 × 8 |
Faceplate thickness | 2 mm / 3 mm |
Connectivity | |
MicroMatch 10 poles (option) | AWG 28 |
Screw terminal | 0.14 - 1.5 mm² |
Spring pressure terminal | X |
Control | |
Dual | X |
Gray | X |
1 out of n | with Encoder/Connector |
Electrical data | |
Power supply (smoothed) | 12 - 30 V DC |
Current consumption | max. 60 mA |
Polarity | |
Common anode or common cathode | X |
Display characteristics | |
Resolution | 5 × 7 dots per character |
Luminosity (blue) | 100 mcd |
Luminosity (green) | 250 mcd |
Luminosity (red) | 60 mcd |
Special texts | X |
Ticker | X |
Other | |
Temperature range | 0 - +65 °C |
Configuration | on site by DIP switches or via DMD Config Kit |
Pane | |
Pane (red) | F 4862 |
Pane (green) | F 4862 |
Pane (blue) | F 4862 |
Compliance | |
EN 81-70 | X |
EN 81-71 Class 1 | F 4862 CVG |
EN 81-71 Class 2 | F 4862 CVG |
EN 81-72 | F 4862 wg |
Assembly DMD 50 with Input Module
Input Module at rear (sandwich construction) |
|
Description | The DMD 50 is composed by individual display modules and an input module. With mounting at the rear the input module is fixed to the left side of the first display module via an U-Connect piece by means of clip fixing (see illustration below). On the right hand side of the last display module an end cap is fitted. It is possible to realise 1-digit, 2-digit and 3-digit displays. |
Assembly |
Input Mdule lateral |
|
Description | The DMD 50 is composed by individual display modules and an input module. With low installation depths the input module can be fixed at the left side of the first display module by means of clip fixing (see illustration below). On the right hand side of the last display module an end cap is fitted. It is possible to realise 1-digit, 2-digit and 3-digit displays. |
Assembly |
DMD 50 – Dot-matrix display with 50 mm height of characters (according to EN 81-70). Faceplate mounting via pane. 1-, 2- or 3-digit display; resolution 5 x 7 dots per character. LED colour red; pane red. Connection technology plug/ribbon cable. Configuration on display by DIP switches or by separate hardware/software. Control dual, gray or 1 out of n via Encoder; polarity common anode or common cathode. Special text as ticker. Additional features (optional): LED colour blue or green; pane blue or green