These displays fit wherever a low installation depth or a high cost effectiveness are key issues. They can be controlled with serial signals and can be equipped with an optional gong module. By means of two keys the displays can be configured on site without any accessories or even more comfortably by means of the optional MFD Config Kit.
Dimensions | |
Dimensions with pane | 90.5 × 59 × 14 mm / 103.5 × 59 × 14 mm (with gong) |
Fixing | |
Mounting | vertical |
Clip fixing | X |
Faceplate thickness | 1 / 1.5 / 2 mm |
Installation depth | 11.5 mm |
Connectivity | |
Spring pressure terminal | 0.2 - 0.7 mm² |
Control | |
RS485 | x |
Electrical data | |
Power supply (smoothed) | 12 - 30 V DC |
Current consumption (12 V) | max. 400 mA |
Current consumption (24 V) | max. 200 mA |
Polarity | |
Common anode or common cathode | X |
Display characteristics | |
DisplayScreen diagonal | 3" |
Display area (vertical) | 50 × 75 mm |
Backlight | LED white |
Height of characters | 30 mm |
Arrow | X |
Number of floors | 63 |
Quantity special information | 2 |
Processor Gong, optional | |
Gong (optional) | X |
Other | |
Temperature range | 0 - +65 °C |
Configuration | directly on the device via micro button or MFD Config Kit |
Pane | |
Pane thickness | 2 mm |
Pane (grey) | X |
Compliance | |
EN 81-20 | X |
EN 81-50 | X |
Installation in faceplate with 2 mm
When installed in 2 mm thick faceplates, shorten all four noses of the bracket using side cutters.
Film colour
COP optionally
COP optionally
Standard LOP/LIP
Film colour
on demand
Connection to an emergency call System
When using the symbols "Please wait" and "Please speak" for the emergency call, the MFD 332 must additionally be connected to the power supply of the emergency call system via DC decoupler and these two signals must be decoupled via relays.