MFD 99 VIII is a multifunctional display. It can be used as full size lettering field/luminous field with illumination of the entire surface. Alternatively, various displays can be integrated. The display is placed in the top field of MFD 99 VIII. In the field in the middle, where the emergency light is located, logos and texts can be presented. In the bottom field, pictograms according to EN 81‑70 as well as six further symbols can be presented. The integrated buzzer can be controlled in parallel with the overload indicator.
Fixing | |
Snap fixing | X |
Faceplate thickness | 1.5 mm / 2 mm / 3 mm |
Connectivity | |
Screw terminal | 0.1 - 1.5 mm² |
Recall light pictograms | |
LED (white) | X |
U (smoothed) | 3 - 30 V DC (switchable: 12 - 30 V DC) |
I | 2.5 mA (20 mA) |
Recall light symbols | |
LED (white) | X |
U | 12 - 30 V DC |
I | 20 mA |
Recall light emergency light | |
LED (white) | X |
U | 12 - 30 V DC |
I | 120 mA |
Buzzer | |
Buzzer (overload) | X |
U | 12 - 30 V DC |
I | 10 mA |
Pane | |
Pane thickness | 2 mm / 3 mm |
Pane (grey) | X |
Compliance | |
EN 81-70 | X |
MFD 99 VIII snap fixing
X = depth – Please note: Different installation depth measures depending on the actual display type and accessories! | |
DMD 30 SP H2/H3 | 38 mm |
DMD 35 SP H2/H3 | 38 mm |
TFT 3.2" H | 41.5 mm |
Auxiliary module LED 99 | 31.5 mm |
Encoder | 34.5 mm |
Connector | 34.5 mm |
Impulse converter | 36.5 mm |
Layout Multifunctional Display MFD 99 VIII
1. Display (floor indicator) |
|
2. Lettering field (emergency light) |
Individually configurable field with additional emergency light function. Film: positive, negative, colour |
3. Symbols (one row/two rows) |
The symbols can be arranged in any order. Customized symbols are available on demand. Film: negative coloured |
4. Pictograms |
At their standard position, the two emergency call pictograms are configured for Low Current power supply (3 - 30 V DC / 2,5 mA). Once their position is shifted or if MFD 99 VIII is employed as full-size luminous field, the supply voltage must be set to 12 - 30 V DC / 20 mA by means of a DIP switch. |