Rainbow Button RB 50 2M XI is a capacitive button for installation behind non-conducting materials like glass, acryl glass, etc.
Installation behind conducting surfaces (e.g. mirrors, conductive paints) is only possible as a special installation and must be clarified with SCHAEFER in each individual case!
This button comes with an additional potential-free alternating contact and a monitoring circuit. The monitoring circuit automatically checks the function of the button at an interval of 24 hours. This ensures increased function safety of the button. Thus, RB 50 2M XI can be employed as emergency call button.
Furthermore, RB 50 2M XI has two galvanically separated connectors for the power supply. Thus, an emergency power supply can be connected at the same time.
In combination with the Power Saver PS 42 it is possible to reduce the luminosity of the RB 50 2M XI depending on motion detection or the ambient brightness.
Fixing | |
Welding studs | M3 × 16 |
Faceplate thickness (glass/acryl glass) | 12 mm |
Thickness support | 2 mm |
Connectivity | |
MicroMatch 6 poles | AWG 28 |
MicroMatch 8 poles | AWG 28 |
Screw terminal 2 + 3 poles | 0,1 - 1 mm² |
Screw terminal 2 + 4 poles | 0.1 - 1 mm² |
Electrical data | |
Power supply (smoothed) | 12 - 30 V DC |
Supply voltage U NOT (smoothed) | 10 - 30 V DC |
Stand-by current | 45 mA |
NO contact (SPST-NO) | |
NO contact (quantity) | 1 |
U (DC) | max. 60 V |
U (AC) | max. 50 V |
I (ohmic load) | max. 1 A |
P | max. 37 V AC / 30 W DC |
Alternating contact (SPDT) | |
Alternating contact (quantity) | 1 |
U (DC) | max. 30 V |
U (AC) | max. 30 V |
I (ohmic load) | max. 2 A |
P | max. 62.5 V AC / 60 W DC |
LED | |
U | 12 - 30 V AC/DC |
Permanent illumination (12 V / luminosity 20%) | 50 mA |
Permanent illumination (12 V / luminosity 100%) | 120 mA |
Permanent illumination (24 V / luminosity 20%) | 40 mA |
Permanent illumination (24 V / luminosity 100%) | 70 mA |
Recall light (12 V / luminosity 20%) | 60 mA |
Recall light (12 V / luminosity 100%) | 130 mA |
Recall light (24 V / luminosity 20%) | 50 mA |
Recall light (24 V / luminosity 100%) | 80 mA |
Other | |
Temperature range | -20 - +65 °C |
Configuration | on site by DIP switch or via RB/PS Config Kit |
MIRRORS AND CONDUCTING SURFACES
Installation behind conducting surfaces (e.g. mirrors, conductive paints) is only possible as a special installation and must be clarified with SCHAEFER in each individual case!
LED colour combination
Colour deviations possible in the case of spare parts or individual parts!