Rainbow Button RB 50 VIII is a capacitive button for installation behind non-conducting materials like glass, acryl glass, etc.
Installation behind conducting surfaces (e.g. mirrors, conductive paints) is only possible as a special installation and must be clarified with SCHAEFER in each individual case!
The luminous colours for quiescent state (permanent illumination) and acknowledgement state (recall light) are different. For both states, the luminous colours and the luminosity are freely adjustable. In combination with the Power Saver PS 42 it is possible to reduce the luminosity of the RB 50 VIII depending on motion detection or the ambient brightness.
Fixing | |
Welding studs | M3 × 16 |
Faceplate thickness (glass/acryl glass) | 12 mm |
Thickness support | 2 mm |
Connectivity | |
MicroMatch 8 poles | AWG 28 |
Screw terminal 2 + 4 poles | 0.1 - 1 mm² |
Electrical data | |
Power supply (smoothed) | 12 - 30 V DC |
Stand-by current | 11 mA |
NO contact (SPST-NO) | |
NO contact (quantity) | 1 |
U (DC) | max. 60 V |
U (AC) | max. 50 V |
I (ohmic load) | max. 1 A |
P | max. 37 V AC / 30 W DC |
LED | |
U | 12 - 30 V AC/DC |
Permanent illumination (12 V / luminosity 20%) | 12 mA |
Permanent illumination (12 V / luminosity 100%) | 80 mA |
Permanent illumination (24 V / luminosity 20%) | 8 mA |
Permanent illumination (24 V / luminosity 100%) | 42 mA |
Recall light (12 V / luminosity 20%) | 25 mA |
Recall light (12 V / luminosity 100%) | 100 mA |
Recall light (24 V / luminosity 20%) | 20 mA |
Recall light (24 V / luminosity 100%) | 52 mA |
Other | |
Temperature range | -20 - +65 °C |
Configuration | on site by DIP switch or via RB/PS Config Kit |
Mirrors and conducting surfaces
Installation behind conducting surfaces (e.g. mirrors, conductive paints) is only possible as a special installation and must be clarified with SCHAEFER in each individual case!
LED colour combination
Colour deviations possible in the case of spare parts or individual parts!