Menu
Your Cart

TFT 3.2" H

TFT 3.2" H
TFT 3.2" H
TFT 3.2" H
TFT 3.2" H
TFT 3.2" H
TFT 3.2" H
TFT 3.2" H
TFT 3.2" H
TFT 3.2" H
TFT 3.2" H
TFT 3.2" H
TFT 3.2" H

TFT 3.2" Features Overview

  • Configuration in installed condition with Touchpad-Pen possible
  • Successor for LCD 128

Configurator:

Software for the configuration of the display TFT 3.2".

System requirements:

  • MS Windows® XP / 7 / 8.1
  • MS .NET Framework 4.5
  • 2 GB RAM
  • Resolution of at least 1024 x 768 pixels
  • DVD-ROM-drive
  • USB-interface

or

  • MS Windows® 10
  • MS .NET Framework 4.5
  • 2 GB RAM
  • Resolution of at least 1024 x 768 pixels
  • Administrator rights
  • DVD-ROM-drive
  • SD-card reader

TFT Wizard (7.83 MB, zip), V2.986

Treiber

Fixing
Mounting horizontal
Welding studs M3 × 8
Faceplate thickness 2 mm / 3 mm
Connectivity
MicroMatch AWG 28
Screw terminal 0.14 - 1.5 mm²
Control
Dual X
Gray X
1 out of n X
BCD X
7-segment X
SP-Bus X
Electrical data
Power supply (smoothed) 12 - 30 V DC
Stand-by current (24 V) 30 mA
Current consumption (24 V) 80 mA
Polarity
Common anode or common cathode X
Display characteristics
DisplayScreen diagonal 3.2" / 8.2 cm
Resolution (horizontal) 400 × 240 pixel
Display area (horizontal) 70 × 42 mm
Supported colours 65,535 colours / 16 Bit / RGB
Luminosity 250 cd/m² (adjustable)
Backlight LED
Service life 50,000 h
Special texts/graphics (also as full screen) 2
Special texts/graphics SP-Bus (also as full screen) 5
Number of floors 63
Arrow
Arrow (travel up | travel down) (travel as animation) X
Buzzer
Buzzer X
Other
Temperature range 0 - +65 °C
Pane
Pane thickness 2 mm / 3 mm
Pane (crystal clear) F TFT 3.2" H
Compliance
EN 81-70 with modified layout
EN 81-71 Class 1 F TFT 3.2" H CVG
EN 81-71 Class 2 F TFT 3.2" H CVG
EN 81-72 F TFT 3.2" H wg

Due to different installation dimensions and fastenings, it is not possible to convert standard windows to windows for EN 81-71 class 1 or 2 or water-protected. Mounting and installation dimensions on request.

TFT 3.2" H
  • AWG 28
  • 0.14 - 1.5 mm²
  • with modified layout
  • F TFT 3.2" H CVG
  • F TFT 3.2" H CVG
  • F TFT 3.2" H wg

Available Options

Ask Question Compare Shop

Downloads

Quickview
DC Decoupler DC Decoupler
DC Decoupler
The DC Decoupler is connected upstream the Rainbow Button type RB 42 2M XI. In normal operation, the emergency call button thus runs via the standard ..
Quickview
TFT Config Kit TFT Config Kit
TFT Config Kit
Configuration kit for TFT-Displays. System requirements MS Windows® XP/Vista/7/8/10 MS .NET Framework 4.5 min. 2 GB RAM Resolution of at least ..
Quickview
LCD/TFT Simulations Kit LCD/TFT Simulations Kit
LCD/TFT Simulations Kit
Different signals of an elevator controller board can be simulated with the simulation kit. The signals are driven via the 16 switches of the box with..
Quickview
Touch Magnet Pen
Touch Magnet Pen
Using a Touch Magnet Pen, the TFT 3.2", TFT 4.3", TFT 5.6" and TFT 7" can be configured when installed. The control, time, buzzer, standby on/off, etc..
Quickview
DC Decoupler F DC Decoupler F
DC Decoupler F
The DC Decoupler is connected upstream the Rainbow Button type RB 42 2M XI. In normal operation, the emergency call button thus runs via the standard ..