Menu
Your Cart

TFT 3.5" F P Class 0

TFT 3.5" F P Class 0
TFT 3.5" F P Class 0
TFT 3.5" F P Class 0
TFT 3.5" F P Class 0
TFT 3.5" F P Class 0
TFT 3.5" F P Class 0
TFT 3.5" F P Class 0
TFT 3.5" F P Class 0

TFT 3.5" F P Class 0 - Parallel

The TFT F display series are extra flat TFT displays with high graphic resolution, which can be installed horizontally and vertically. In addition to floor designations and direction arrows, special displays can also be shown as full and partial image, elevator data, logos, slide show and running text.


Configuration

The display can be configured intuitively with the free SCHAEFER-Configurator program. All settings can be made conveniently here. 

The information is displayed in the TFT F via widgets that can be freely positioned. More about the configuration via the SCHAEFER Configurator can be found in the manual chapter 4.


Device internal menu

The internal menu of the device can be operated via three keys on the back of the display. For more information on the internal menu, please refer to the manual chapter 4.6.5.


Functions / Features
Date / Time
Voice announcements (floor & special announcements)
Gong Function
Floor display: Numbers / letters multi-digit
Pictures / Symbols
Special displays
Special texts / graphics (also as full screen)
Display elevator data
Logo
Floor information
Wallpaper image
Slide show
Ticker
Integrated configuration menu
Configuration via App
integrated speaker optional
Connection for external speaker/amplifier
Standing/static arrows
Arrow (travel up | travel down) (travel as animation)
Play video from SD card
Video streaming
Video in full screen mode
Function expansion via widgets
Remote maintenance
Network interface (WLAN/LAN)
Fixing
Mounting horizontal or vertical
Welding studs M3 x 8
Adhesive fixing X
Faceplate thickness 1 mm / 2 mm
Installation depth 10.5 mm / 10.3 mm
Connectivity
JST ZHR 0,14 mm² / AWG 28 - 24
Control
Dual X
Gray X
1 out of n X
Electrical data
Power supply (smoothed) 12 - 30 V DC
Current consumption (24 V / 10% luminosity) typ. 57mA
Current consumption (24 V / 100% luminosity) typ. 61mA
Polarity
Common anode or common cathode X
Display characteristics
DisplayScreen diagonal 3.5"
Resolution 320 x 480 Pixel
Aspect ratio 3:2
Display area 73 x 48.5 mm
Supported colours 262,144 / 18 Bit / RGB
Luminosity 250 cd/m²
Backlight LED white
Service life 50.000 h
Special texts/graphics (also as full screen) 16
Number of floors 64
Date/Time X
Acoustic properties
Gong X
Announcements X
Loudspeaker (option) X
Output rating 1 VA (sine) at 24 V
Arrow
Arrow (travel up | travel down) (travel as animation) X
Other
Temperature range 0 - +65 °C
Configuration On site via menu or via TFT Config Kit.
microSD X
Pane
Pane (crystal clear) X
Compliance
EN 81-70 with optional "Speaker 50"

 


Due to different installation dimensions and fixings, the conversion of standard windows to windows for EN 81-71 class 1 or 2 is not possible. Mounting and installation dimensions on request.

 


1. 10-pin JST ZHR-10 plug for connection to the control system, 8 inputs as well as +24V and GND.
2.  JST ZHR-8 connector 8-pin with additional 8 inputs from the control.
3. JST ZHR-3 connector 3-pin for connection to an LF amplifier or for connecting the internal loudspeaker.
4. Programming interface
5. Jumper for setting common anode or cathode.
6. Slot Micro-SD card
7. Micro button for settings via the integrated configuration menu.
8. 8 Ă— fixing straps can be cut off if necessary (e.g. if there is not enough space in the panel).

Requirements for the design of lift system information according to EN 81-20

In the car, the following information on the lift system must be given:

  • Name of the manufacturer/installer
  • Serial number of the elevator system
  • Year of manufacture
  • Nominal load of the lift system in kg
  • Number of people
Letters, numbers and graphic symbols used for the information in the car must meet the following requirements:

  • min. 10 mm for capital letters, numbers and graphic symbols
  • min. 7 mm for small letters 
If you have any further questions about standard-compliant implementations, please contact your SCHAEFER sales representative in confidence. We will be glad to help you.

TFT 3.5" F P Class 0
  • with optional "Speaker 50"

Available Options

Ask Question

Downloads

Quickview
Speaker 70
Speaker 70
Auxiliary loudspeaker for higher output rating and improved playback quality...
Quickview
Speaker 60 VP
Speaker 60 VP
Structure-borne noise converter for installation behind closed surfaces for protection against spary water and vandalism...
Quickview
DVM 70 Config Kit
DVM 70 Config Kit
Software for configuration of DVM 70 / DVM 70 V2.0. System requirements MS Windows® XP/Vista/7/8/10 MS .NET Framework 3.5 mi..
Quickview
Encoder 1 out of 15
Encoder 1 out of 15
The encoder is required for control 1 out of n for displays that are designed for binary code. The encoder converts 1 of n into dual code. ..
Quickview
Encoder 1 out of 31
Encoder 1 out of 31
The Encoder 1 out of 31 is needed with the SM 84 for reproduction of 16 up to 31 announcements with control 1 out of n. The Encoder converts 1 out of ..
Quickview
Impulse converter
Impulse converter
An impulse converter can be added to a SCHAEFER display. It  converts serial pulses to dual code...
Quickview
DC Decoupler
DC Decoupler
The DC Decoupler is connected upstream the Rainbow Button type RB 42 2M XI. In normal operation, the emergency call button thus runs via the standard ..
Quickview
Speaker 50
Speaker 50
Auxiliary loudspeaker for higher output rating and improved playback Quality...
Quickview
Encoder 1 out of 15 F
Encoder 1 out of 15 F
The Encoder 1 out of 15 is needed with the SM 84 for reproduction of 7 up to 15 announcements with control 1 out of n.The Encoder converts 1 out of n ..
Quickview
DC Decoupler F
DC Decoupler F
The DC Decoupler is connected upstream the Rainbow Button type RB 42 2M XI. In normal operation, the emergency call button thus runs via the standard ..
Quickview
Connection adapter TFT F P 10p
Connection adapter TFT F P 10p
Lines with open ends, coming from the lift controller, can be connected via the connection adapters TFT F P 8p/10p (8 poles/10 poles) to the TFT F P (..
Quickview
Connection adapter TFT F P 8p
Connection adapter TFT F P 8p
Lines with open ends, coming from the lift controller, can be connected via the connection adapters TFT F P 8p/10p (8 poles/10 poles) to the TFT F P (..