Due to different installation dimensions and fastenings, the conversion from standard windows to windows for EN 81-71 Class 1 or 2 is not possible. Mounting and installation dimensions on request.
Requirements for the design of elevator system information according to EN 81-20
The following information on the lift system must be entered in the car:
- Name of the manufacturer/assembly plant
- Serial number of the elevator system
- Year of manufacture
- Nominal load of the lift system in kg
- Number of people
- min. 10 mm for capital letters, numbers and graphic symbols
- min. 7 mm for small letters
Dimensions
1. 10-pin JST ZHR-10 plug for connection to the control system, 8 inputs as well as +24V and GND.
2. JST ZHR-8 connector 8-pin with additional 8 inputs from the control.
3. JST ZHR-3 connector 3-pin for connection to an LF amplifier or for connecting the internal loudspeaker.
4. Programming interface
5. Jumper for setting common anode or cathode.
6. Slot Micro-SD card
7. Micro button for settings via the integrated configuration menu.
8. 8 × fixing straps can be cut off if necessary (e.g. if there is not enough space in the panel).
