Menu
Your Cart

TFT 5" F SRT S CLASS 1

TFT 5" F SRT S CLASS 1
TFT 5" F SRT S CLASS 1
TFT 5" F SRT S CLASS 1
TFT 5" F SRT S CLASS 1
TFT 5" F SRT S CLASS 1
TFT 5" F SRT S CLASS 1
TFT 5" F SRT S CLASS 1
TFT 5" F SRT S CLASS 1
TFT 5" F SRT S CLASS 1
TFT 5" F SRT S CLASS 1

TFT 5" F SRT S - Serial

The TFT F display series are extra flat TFT displays with high graphic resolution, which can be installed horizontally and vertically. In addition to floor designations and direction arrows, special displays can also be shown as full and partial image, elevator data, logos, slide show, running text and time.


Configuration

The display can be configured intuitively with the free SCHAEFER-Configurator program. All settings can be made conveniently here.

The information is displayed in the TFT F via widgets that can be freely positioned. More about the configuration via the SCHAEFER Configurator can be found in the manual chapter 4.


Device internal menu

The internal menu of the device can be operated via three keys on the back of the display. For more information on the internal menu, please refer to the manual chapter 5.


Functions / Features

Date / Time
Voice announcements (floor & special announcements)
Gong Function
Floor display: Numbers / letters multi-digit
Pictures / Symbols
Special displays
Special texts / graphics (also as full screen)
Display elevator data
Logo
Floor information
Wallpaper image
Slide show
Ticker
Integrated configuration menu
Configuration via App
integrated speaker optional
Connection for external speaker/amplifier
Standing/static arrows
Arrow (travel up | travel down) (travel as animation)
Play video from SD card
Video streaming
Video in full screen mode
Function expansion via widgets
Remote maintenance
Network interface (WLAN/LAN)
Fixing
Mounting horizontal or vertical
Welding studs M3 × 10 / M3 x 12
Fixing (screw fixing) X
Faceplate thickness 2 mm
Installation depth 16 mm
Connectivity
JST ZHR 0,14 mm² / AWG 28 - 24
Control
Serial X
Electrical data
Power supply (smoothed) 12 - 30 V DC
Current consumption (24 V / 10% luminosity) typ. 93 mA
Current consumption (24 V / 100% luminosity) typ. 105 mA
Polarity
Common cathode X
Display characteristics
DisplayScreen diagonal 5"
Resolution 800 × 480
Aspect ratio 16 : 9
Display area 112 x 67.9 mm
Supported colours 16.7 Mio. / 24 Bit / RGB
Luminosity 800 cd/m²
Backlight LED white
Service life 50.000 h
Special texts/graphics (also as full screen) X
Number of floors 254
Date/Time X
Acoustic properties
Gong X
Announcements X
Loudspeaker (option) X
Output rating 1 VA (sine) at 24 V
Arrow
Arrow (travel up | travel down) (travel as animation) X
Other
Temperature range 0 - +65 °C
microSD X
Pane
Pane (crystal clear) X
Compliance
EN 81-70 with optional "Speaker 60 VP"

 

Due to different installation dimensions and fixings, the conversion of standard windows to windows for EN 81-71 class 1 or 2 is not possible.

Mounting and installation dimensions on request.

 

  1.     CAN: Micro MATE-N-LOK connector (4p St1r) for connection to the CANopen bus.
  2.     JST ZHR-10 10-pin plug for connecting display and control elements (e.g. buttons, key switches, displays). Example: up to 8 pushbuttons can be connected for 3-wire technology or 4 pushbuttons for 4-wire technology.
  3.     JST ZHR-3 plug 3-pin for connection to an LF amplifier or for connecting the internal loudspeaker.
  4.     RS 485: RS 485 interface
  5.     Programming interface
  6.     Jumper to set the termination for the RS 485 interface.
  7.     Jumper to set the CANopen termination.
  8.     Slot Micro-SD card
  9.     Micro button for settings via the integrated configuration menu.
  10.     8 × fixing straps can be cut off if necessary (e.g. if there is insufficient space in the panel).

Requirements for the design of elevator system information according to EN 81-20

The following information on the lift system must be entered in the car:

  • Name of the manufacturer/assembly plant
  • Serial number of the elevator system
  • Year of manufacture
  • Nominal load of the lift system in kg
  • Number of people
Letters, numbers and graphic symbols used for the information in the car must meet the following requirements:

  • min. 10 mm for capital letters, numbers and graphic symbols
  • min. 7 mm for small letters 
If you have any further questions about standard-compliant implementations, please contact your SCHAEFER sales representative in confidence. We will be glad to help you.
TFT 5" F SRT S CLASS 1
  • with optional "Speaker 60 VP"

Available Options

Downloads