TFT 7" F SRT P CLASS 0

Description
Specifications

TFT 7" F SRT P - parallel

The TFT F display series are extra flat TFT displays with high graphic resolution, which can be installed horizontally and vertically. In addition to floor designations and direction arrows, special displays can also be shown as full and partial image, elevator data, logos, slide show, running text and time.

Configuration

The display can be configured intuitively with the free SCHAEFER-Configurator program. All settings can be made conveniently here.

The information is displayed in the TFT F via widgets that can be freely positioned. More about the configuration via the SCHAEFER Configurator can be found in the manual chapter 4.

Device internal menu

The internal menu of the device can be operated via three keys on the back of the display. For more information on the internal menu, please refer to the manual chapter 5.

Functions / Features
Date / Time
Voice announcements (floor & special announcements)
Gong Function
Floor display: Numbers / letters multi-digit
Pictures / Symbols
Special displays
Special texts / graphics (also as full screen)
Display elevator data
Logo
Floor information
Wallpaper image
Slide show
Ticker
Integrated configuration menu
Configuration via App
integrated speaker	optional
Connection for external speaker/amplifier
Standing/static arrows
Arrow (travel up \| travel down) (travel as animation)
Play video from SD card
Video streaming
Video in full screen mode
Function expansion via widgets
Remote maintenance
Network interface (WLAN/LAN)

Fixing
Mounting	horizontal or vertical
Welding studs	M3 × 8
Adhesive fixing	X
Faceplate thickness	1 mm / 2 mm
Installation depth	11.5 mm / 11.3 mm
Connectivity
JST	ZHR 0,14 mm² / AWG 28 - 24
Control
Dual	X
Gray	X
1 out of n	X
Electrical data
Power supply (smoothed)	12 - 30 V DC
Current consumption (24 V / 10% luminosity)	typ. 150 mA
Current consumption (24 V / 100% luminosity)	typ. 300 mA
Polarity
Common anode or common cathode	X
Display characteristics
DisplayScreen diagonal	7"
Resolution	1024 × 600
Aspect ratio	16:9
Display area	152.8 × 84.8 mm
Supported colours	16.7 mio. / 24 Bit / RGB
Luminosity	800 cd/m²
Backlight	LED white
Service life	50,000 h
Special texts/graphics (also as full screen)	16
Number of floors	64
Date/Time	X
Acoustic properties
Gong	X
Announcements	X
Loudspeaker (option)	X
Output rating	1 VA (sinusoidal) at 24 V
Arrow
Arrow (travel up \| travel down) (travel as animation)	X
Other
Temperature range	0 - +65 °C
Configuration	On site via menu or via TFT Config Kit.
microSD	X
Pane
Pane (crystal clear)	X
Compliance
EN 81-70	with optional "Speaker 50"
EN 81-71 Class 1	TFT 7" F parallel (Class 1)
EN 81-71 Class 2	TFT 7" F parallel (Class 2)

1 × JST ZHR-10 connector, 10-pin and 1 × JST ZHR-8 connector, 8-pin for connection to the controller, 8 inputs as well as +24 V and GND.
JST ZHR-3 connector, 3-pin for connection to an AF amplifier or for direct connection of an internal loudspeaker.
Debug interface (SWD)
Programming interface
Jumper for setting common anode or common cathode.
Slot for micro SD card.
Micro push-button for settings via the integrated configuration menu.
8 × mounting tabs can be detached if necessary (e.g. if there is a lack of space in the tableau).

Due to different installation dimensions and fixings, conversion of standard windows to windows for EN 81-71 class 1 or 2 is not possible. Fastening and installation dimensions on request.

Requirements for the design of information on the lift system according to EN 81-20

The following information on the lift system must be given in the car. EN 81-20

The following information on the lift system must be given in the car:

Name of the manufacturer/installer
serial number of the lift system
Lift installation information
Part number of the lift installation
Part number of the lift installation. id="317">Year of construction
Nominal load of the lift system in kg
Number of persons

Letters, The letters, numbers and graphic symbols used for the information in the car shall comply with the following requirements:

min. 10 mm for upper case letters, numbers and graphic symbols
min. 7 mm for lower case letters

If you have any further questions regarding standard-compliant realisations, please contact your SCHAEFER sales representative in confidence. We will be happy to help you.