Menu
Your Cart

Touch TFT 7" (st. steel)

Touch TFT 7" (st. steel)
Touch TFT 7" (st. steel)
Touch TFT 7" (st. steel)
Touch TFT 7" (st. steel)
Touch TFT 7" (st. steel)
Touch TFT 7" (st. steel)
Touch TFT 7" (st. steel)
Touch TFT 7" (st. steel)
Touch TFT 7" (st. steel)
Touch TFT 7" (st. steel)

Touch TFT 7" is a module consisting of a display with a screen diagonal of 7", combined with a capacitive touch pad. Touch TFT 7" can serve as landing fixture, indicator fixture or as numeric key pad in the car fixture for floor access control.

Fixing
Mounting horizontal / vertical
Welding studs M3 × 16
Connectivity
MicroMatch AWG 28
Screw terminal 0.14 - 1.5 mm²
Control
Dual X
Gray X
1 out of n X
SP-Bus X
Electrical data
Power supply (smoothed) 12 - 30 V DC
Stand-by current (24 V) 60 mA
Current consumption (12 V) 250 mA
Current consumption (24 V) 180 mA
Polarity
Common anode or common cathode X
Display characteristics
DisplayScreen diagonal 7" / 17.8 cm
Resolution (horizontal) 800 × 480 pixels
Resolution (vertical) 480 × 800 pixels
Display area (horizontal) 152 × 91 mm
Display area (vertical) 91 × 152 mm
Supported colours 65,535 colours / 16 Bit / RGB
Luminosity 315 cd/m²
Backlight LED
Special texts/graphics (also as full screen) 5
Number of floors 63
Processor Gong, optional
Gong (optional) internal or external gong
Recall light emergency light
U 12 - 30 V DC smoothed (galvanically separated)
I 120 mA (12 V)
Other
Temperature range -25 - +65 °C
Configuration Made by SCHAEFER GmbH or on site via integrated configuration menu.
microSD X
Supported BMP, GIF (with transparency, not all formats)
Pane
Pane thickness 6 mm
Compliance
EN 81-71 Class 1 X
EN 81-72 X

Standard Layouts

Design 1

...
...
...


Design 2

...
...
...


Design 3

...
...
...


Design 4

...
...
...


Design 5

...
...
...

Touch TFT 7" (st. steel)
  • AWG 28
  • 0.14 - 1.5 mm²
  • X
  • X

Available Options

Ask Question

Downloads

Quickview
Speaker 56
Speaker 56
The PG 56 will create 1, 2 or 3 tones once a signal is at the input. The polarity (common anode or cathode) can be adjusted via a jumper. The volume c..
Quickview
PG 42
PG 42
The PG 42 will create 1, 2 or 3 tones once a signal is at the input. The polarity (common anode or cathode) can be adjusted via a jumper. Volume and..
Quickview
PG 56
PG 56
The PG 56 will create 1, 2 or 3 tones once a signal is at the input. The polarity (common anode or cathode) can ve adjusted via a jumper. Volume and..
Quickview
PS 42
PS 42
Sensor module for saving energyPS 42 serves for switching off modules. It comes with two independent outputs and two digital inputs. The desired funct..
Quickview
PS 42 LS
PS 42 LS
Sensor module for saving energy: version with light sensorPS 42 LS serves for switching off modules depending on the ambient brightness. It comes with..
Quickview
PS 42 EMC LS
PS 42 EMC LS
Sensor module for saving energy: version with external motion sensorPS 42 EMC LS serves for switching off modules depending on the ambient brightness ..
Quickview
HQ 56
HQ 56
Structure-borne noise converter for haptic acknowledgement...