Menu
Your Cart

Wiring

We deliver ready-to-install and controller specifically tested fixturesfor your lift control systems. These can be installed in a plug-andplaymatter on site. Various circuit boards and displays are availablefrom stock. Buttons, indicators, displays and luminous arrows fromSCHAEFER can easily be integrated in the infrastructure.

  • Fixtures, pre-wiring and testing from one hand
  • Saving of costs and time by easy plug-and-play installation at site
  • Various components available from stock at SCHAEFER
  • Easy combination with SCHAEFER components

SCHAEFER offers pre-wiring for controllersystems of various manufacturers e. g.KW Aufzugstechnik, Arkel, NEW LIFT andmany more. For further informationabout pre-wiring please contact oursales team.

Brand: Arkel Part number: MCODE-7560289143
Arkel-Bus to Gray/Binary Code converter for the wiring of SCHAEFER displays as for example DMD, TFT, etc...
Brand: Arkel Part number: MCODE-6874209153
LCD device with a resolution of 240x128 Pixel (114x64 mm display). Graphics dependent of the number of floors, dynamic and static luminous arrows, out of service and overload symbols, date and time option. LCD contrast configurable...
Part number: MCODE-7248695130
ARKEL ARCODE PRE-WIRING Components and pre-wiring from one hand We deliver ready-to-wire products and for your Arkel ARCODE lift control already tested indicator boards. Onsite, you can put them into operation by plug-and-play. Many Arkel circuit and indicator boards are directly available and on ..
Part number: MCODE-2563478019
ARKEL ARCODE PRE-WIRINGComponents and pre-wiring from one handWe deliver ready-to-wire products and for your Arkel ARCODE lift control already tested indicator boards. Onsite, you can put them into operation by plug-and-play. Many Arkel circuit and indicator boards are directly available and on stoc..
Brand: Arkel Part number: MCODE-4589761302
Arkel-Bus to Gray/Binary Code converter for the wiring of SCHAEFER displays as for example DMD, TFT, etc...
Brand: Arkel Part number: MCODE-6172850439
..
Brand: Arkel Part number: MCODE-3608792541
Two 30 mm 5x7 dot matrix modules (Dot Matrix Call/Indicator Modules). Connection with maximum two buttons. Presentation of text, arrows, overload and out of order signs. AQ-call and gong from SCHAEFER are optional...
Brand: Arkel Part number: MCODE-3098154276
Two 30 mm 5x7 dot matrix modules (Dot Matrix Call/Indicator Modules). Connection with maximum two buttons. Presentation of text, arrows, overload and out of order signs. AQ-call and gong from SCHAEFER are optional...
Brand: Arkel Part number: MCODE-1984026735
The BCBUT (Landing Call Module) is used for call indicator boards without any display. A maximum of two call buttons can be connected. Two programmable IOs for example for key buttons or illuminated arrows. AQ call and a gong from SCHAEFER are optionally connectable...
Brand: Arkel Part number: MCODE-7360951842
LCD display with a resolution of 128x64 pixels. Horizontal mounting in cabin and display boards / Vertical mounting in call boards. Two buttons are connectable. AQ-call and gong from SCHAEFER are optional. Arrow direction display, level-dependant graphics, out of service and overload symbols...
Brand: Arkel Part number: MCODE-0346925718
Cabin board-knot (Car Call Control Unit / Car command Controller) for the connexion of buttons, displays, emergency lights, alarm, etc...
Part number: IF 99 Triple
IF Triple is employed for fixture pre-wiring. The entire fixture can be supplied via D-Sub connectors. Many controller-specific pin assignments are realized; apart from that, D-Sub cables with “open ends” can be supplied. IF 99 comes with female connectors type MicroMatch for ten stops and five spec..
Part number: IF 99 V
IF 99 is employed for fixture pre-wiring. The entire fixture can be supplied via D-Sub connectors. Many controller-specific pin assignments are realized; apart from that, D-Sub cables with “open ends” can be supplied. IF 99 comes with female connectors type MicroMatch for ten stops and five special ..
Part number: IF Pult
IF Pult is employed for Pulttableau (desk-shaped fixture) pre-wiring. The entire fixture can be supplied via D-Sub connectors. Many controller-specific pin assignments are realized; apart from that, D-Sub cables with “open ends” can be supplied. IF Pult comes with female connectors type MicroMatch f..
Brand: SCHAEFER Part number: 004289
With help of the insertion tool that allows the flexible braided wire easily and comfortably into the socket of the insulation displacement connector, to be pressed in the installation element itself...
Brand: Arkel Part number: MCODE-2847136590
..
Brand: Arkel Part number: MCODE-0738451296
..
Brand: Arkel Part number: MCODE-2164730958
..
Brand: Arkel Part number: MCODE-3046851927
The KKBT (Landing Call Module) is used in landing fixtures without screens. Up to two buttons can be connected. A programmable IO for example for key buttons or luminours arrows, is present. AQ-Call and gong from SCHAEFER are optional...
Showing 1 to 19 of 19 (1 Pages)
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.