Modular aufgebautes Dot Matrix Display (Punktmatrix-Anzeige) mit 50 mm Zeichenhöhe.
Fijación | |
Fijación con clip | X |
Pernos soldados | M3 × 8 |
Grosor de la placa frontal | 2 mm / 3 mm |
Conectividad | |
Borne de tornillo | 0,14 - 1,5 mm² |
MicroMatch 10 polos (opcional) | AWG 28 |
Borne de resorte | X |
Control | |
Binario | X |
Gray | X |
1 hilo por planta | über Encoder/Connector |
Datos eléctricos | |
Tensión de alimentación (alisado) | 12 - 30 V DC |
Consumo de corriente | max. 60 mA |
Polaridad | |
Ánodo común o cátodo común | X |
Características de la pantalla | |
Resolución | 5 × 7 Punkte pro Zeichen |
Luminosidad (azul) | 100 mcd |
Luminosidad (rojo) | 60 mcd |
Luminosidad (verde) | 250 mcd |
Textos especiales | X |
Textos corriendo en pantalla | X |
Otros | |
Gama de temperaturas | 0 - +65 °C |
Configuración | vor Ort über DIP-Schalter oder über DMD Config Kit |
Vidrio | |
Vidrio (rojo) | F 4862 |
Vidrio (verde) | F 4862 |
Vidrio (azul) | F 4862 |
Conformidad con la norma | |
EN 81-70 | X |
EN 81-71 Class 1 | F 4862 CVG |
EN 81-71 Class 2 | F 4862 CVG |
EN 81-72 | F 4862 wg |
Assembly DMD 50 with Input Module
Input Module at rear (sandwich construction) |
|
Description | The DMD 50 is composed by individual display modules and an input module. With mounting at the rear the input module is fixed to the left side of the first display module via an U-Connect piece by means of clip fixing (see illustration below). On the right hand side of the last display module an end cap is fitted. It is possible to realise 1-digit, 2-digit and 3-digit displays. |
Assembly |
Input Mdule lateral |
|
Description | The DMD 50 is composed by individual display modules and an input module. With low installation depths the input module can be fixed at the left side of the first display module by means of clip fixing (see illustration below). On the right hand side of the last display module an end cap is fitted. It is possible to realise 1-digit, 2-digit and 3-digit displays. |
Assembly |
DMD 50 – Dot-matrix display with 50 mm height of characters (according to EN 81-70). Faceplate mounting via pane. 1-, 2- or 3-digit display; resolution 5 x 7 dots per character. LED colour red; pane red. Connection technology plug/ribbon cable. Configuration on display by DIP switches or by separate hardware/software. Control dual, gray or 1 out of n via Encoder; polarity common anode or common cathode. Special text as ticker. Additional features (optional): LED colour blue or green; pane blue or green