Fijación | |
Pernos soldados | M3 × 20 |
Grosor de la placa frontal | 2 mm |
Conectividad | |
Borne de tornillo 2 × 5 polos | 0,1 - 1 mm² |
MicroMatch 6 polos | AWG 28 |
Datos eléctricos | |
Tensión de alimentación (alisado) | 20 - 30 V DC |
Corriente de reposo (24 V) | max. 40 mA (bei maximaler Dauerbeleuchtung) |
Corriente de trabajo (24 V) | max. 60 mA (bei zwei angezogenen Relais) |
Elemento de conmutación | |
Relé | X |
Relé | |
Relés (cuantía) | 2 |
U (AC) | max. 50 V |
U (DC) | max. 60 V |
I | max. 1 A |
P | max. 30 W |
Otros | |
Gama de temperaturas | -25 - +65 °C |
Conformidad con la norma | |
EN 81-71 Class 2 | X |
EN 81-72 | X |
Tecnología del transpondedor | |
Claves de transpondedor (número de participantes) | max. 255 |
Tipo "sólo lectura" | 64 Bit / 40 Bit data |
Frecuencia | 125 kHz |
Claves posibles | 1,1 × 10¹² |
Tiempo de detección | 0,2 s |
It is basically possible to arrange several EKS units within one fixture. However, the following conditions should be respected:
- installation of EKS 42 VP (vandal-resistant variant behind 2 mm stainless steel) without minimum interspace or
- installation of EKS 42 / EKS 50 in all other variants with the illustrated minimum distances