Der Elektronische Schlüsselschalter EKS erkennt elektronische Schlüssel (Transponder) aus einigen Zentimetern Entfernung. Durch dieses Gerät können konventionelle Schlüsselschalter oder -taster ersetzt werden. Anstelle der herkömmlichen Schlüssel werden die Transponder zur (berührungslosen) Betätigung des EKS verwendet.Konfigurationsmöglichkeiten:
- Tastfunktion 3 Sekunden Impulszeit
- Tastfunktion 0,3 Sekunden Impulszeit
- Tastfunktion Impulszeit „beliebig lang“ (Relais schaltet, solange Transponder vorgehalten wird)
- Schaltfunktion
- 1 Relais (potentialfreier Wechsler)
- 2 Relais (potentialfreie Wechsler)
Fijación | |
Fijación con clip | X |
Grosor de la placa frontal | 2 - 3 mm |
Conectividad | |
Borne de tornillo 2 × 5 polos | 0,1 - 1 mm² |
Datos eléctricos | |
Tensión de alimentación (alisado) | 12 - 30 V DC |
Corriente de reposo (12 V) | max. 120 mA (bei maximaler Dauerbeleuchtung) |
Corriente de reposo (24 V) | max. 60 mA (bei maximaler Dauerbeleuchtung) |
Corriente de trabajo (12 V) | max. 150 mA (bei zwei angezogenen Relais) |
Corriente de trabajo (24 V) | max. 80 mA (bei zwei angezogenen Relais) |
Elemento de conmutación | |
Relé | X |
Relé | |
Relés (cuantía) | 2 |
U (AC) | max. 50 V |
U (DC) | max. 60 V |
I | max. 1 A |
P | max. 30 W |
LED | |
U (alisado) | 12 - 30 V DC |
Registro luminoso/iluminación permanente | Quittierung und Dauerbeleuchtung sind in drei Helligkeitsstufen unabhängig voneinander einstellbar: dunkel, mittel, hell. |
Otros | |
Gama de temperaturas | -25 - +65 °C |
Grado de protección según DIN EN 60529 | IP 55 |
Conformidad con la norma | |
EN 81-71 Class 1 | X |
EN 81-72 | X |
Tecnología del transpondedor | |
Claves de transpondedor (número de participantes) | max. 156 |
Tipo "sólo lectura" | 64 Bit / 40 Bit Data |
Frecuencia | 125 kHz |
Claves posibles | 1,1 × 10¹² |
Tiempo de detección | 0,2 s |
It is basically possible to arrange several EKS units within one fixture. However, the following conditions should be respected:
- installation of EKS 42 VP (vandal-resistant variant behind 2 mm stainless steel) without minimum interspace or
- installation of EKS 42 / EKS 50 in all other variants with the illustrated minimum distances