Der Elektronische Schlüsselschalter EKS erkennt elektronische Schlüssel (Transponder) aus einigen Zentimetern Entfernung. Durch dieses Gerät können konventionelle Schlüsselschalter oder -taster ersetzt werden. Anstelle der herkömmlichen Schlüssel werden die Transponder zur (berührungslosen) Betätigung des EKS verwendet.Konfigurationsmöglichkeiten:
- Tastfunktion 3 Sekunden Impulszeit
- Tastfunktion 0,3 Sekunden Impulszeit
- Tastfunktion Impulszeit „beliebig lang“ (Relais schaltet, solange Transponder vorgehalten wird)
- Schaltfunktion
- 1 Relais (potentialfreier Wechsler)
- 2 Relais (potentialfreie Wechsler)
Fissaggio | |
Distanziatore + Dado | X |
Spessore della piastra da incasso | 2 - 10 mm |
Spessore della piastra da incasso (con distanziatore) | ≤ 6 mm |
Spessore della piastra da incasso (senza distanziatore) | > 6 mm |
Connettività | |
Morsetto a vite 2 × 5 poli | 0,1 - 1 mm² |
Dati elettrici | |
Tensione di alimentazione (lisciato) | 12 - 30 V DC |
Corrente di riserva (12 V) | max. 120 mA (bei maximaler Dauerbeleuchtung) |
Corrente di riserva (24 V) | max. 60 mA (bei maximaler Dauerbeleuchtung) |
Corrente di funzionamento (12 V) | max. 150 mA (bei zwei angezogenen Relais) |
Corrente di funzionamento (24 V) | max. 80 mA (bei zwei angezogenen Relais) |
Elemento di commutazione | |
Relè | X |
Relè | |
Relè (quantità) | 2 |
U (AC) | max. 50 V |
U (DC) | max. 60 V |
I | max. 1 A |
P | max. 30 W |
LED | |
U (lisciato) | 12 - 30 V DC |
Registro luminoso/illuminazione permanente | Quittierung und Dauerbeleuchtung sind in drei Helligkeitsstufen unabhängig voneinander einstellbar: dunkel, mittel, hell. |
Altro | |
Gamma delle temperature | -25 - +65 °C |
Tecnologia a transponder | |
Codici di chiavi elettroniche (numero di partecipanti) | max. 156 |
Tipo «solo lettura» | 64 Bit / 40 Bit Data |
Frequenza | 125 kHz |
Codici possibili | 1,1 × 10¹² |
Tempo di rivelazione | 0,2 s |
It is basically possible to arrange several EKS units within one fixture. However, the following conditions should be respected:
- installation of EKS 42 VP (vandal-resistant variant behind 2 mm stainless steel) without minimum interspace or
- installation of EKS 42 / EKS 50 in all other variants with the illustrated minimum distances
IP 54 DIN EN 60529:2014-09 with housing 04, 05, 08, 09.