Menu
Your Cart

Bus-Systems

Part number: 160
The Bus-Connector is required for connecting the DMD 30/35 SP to the SP-Bus. Furthermore, additional elements like call buttons, key switches and arrows may be connected...
Part number: 159
The Bus-Connector Car is required if the DMD 30/35 SP is incorporated into a cabin control panel. Here the connection options include 6 cabin calls + 2 special pushbuttons (door button, key switch), 8 special indicators or an MFD 99...
Part number: 158
The Button Module converts individual input signals to serial SP-Bus signals. SP-Bus signals from the fixtures are converted to individual output signals. The module is mounted in the control box and connected with the lift controller. By means of the jumpers the Button Module can be adjusted to the..
Part number: 161
This node is incorporated into the cabin control panels and includes scope to connect the SP-Bus and elements such as the cabin-call button and special pushbuttons (door button, key switch). The SP-Bus Car Node also includes an emergency light and scope to connect an emergency call button. If requir..
Part number: 172
For connecting an SP-Bus Node in the cabin...
Part number: 157
The Display Module converts individual input signals to serial SP-Bus signals. It is mounted in the control box and connected with the lift controller. By means of the jumpers the Display Module can be adjusted to the controller...
Part number: 168
Female connector: crimp type connection with main line..
Part number: 162
The SP-Bus Node is incorporated in the call and indicator panels and allows connection of the SP-Bus, as well as elements such as the call button, arrows, special indicators and key switch. If required, the key switch can be configured as a means of encryption for the calls, while the volume of the ..
Part number: CAN-Übergabemodul 4p
CAN transfer module for installation in controllers respectively for connection of two controllers...
Part number: MCODE-5302697841
CAN-IO Board 16 I/O Conditions and clamp plan Node ID..
Part number: MCODE-3967852041
CAN-IO Board 16 I/O Conditions and clamp plan Node ID..
Part number: 1003405
CANopen node with 8 input/output contacts. Connection of 8 buttons for 3-wire technology or 4 buttons for 4-wire technology. ADVANTAGES:  flat design (suitable for SlimLine and Aurora fixtures)  Use of the latest processor technology and thus optimally equipped for the ..
Part number: 1003406
CANopen node with 16 input/output contacts. Connection of 16 buttons for 3-wire technology or 8 buttons for 4-wire technology. ADVANTAGES:  flat design (suitable for SlimLine and Aurora fixtures)  Use of the latest processor technolog..
Part number: CANopen Config Kit
By means of the software CANwizard® including Active X control elements, the configuration and error diagnostics of all components connected to the CAN bus is effected. The software includes special functions for the application profile CiA-417 for lifts. A free service version of the software CANwi..
Part number: HBN Visio Gateway
The HBN Visio Gateway ensures communication between the TouchMedia TFT flex display and the HBN Gateway...
Part number: SP-Bus
SP-Bus (SCHAEFER-Panel-Bus) is a system for simple wiring of landing and indicator fixtures from SCHAEFER. For the SP-Bus no PC configuration is necessary. At the displays / nodes just the floor is set by means of DIP switches respectively via a menu. With regard to the controller, the polarity, the..
Part number: SP-Bus Flachbandkabel (4-polig)
 ..
Part number: SP-Bus Flachbandkabel (Aderendhülsen)
 ..
Showing 1 to 21 of 21 (1 Pages)