Menu
Your Cart

Accessories

Part number: 262
The Connector is used for connecting SCHAEFER displays having female Micro-Match connectors. Description Order number Connector incl. Micro-Match cable 10 poles, 250 mm 008812..
Part number: 260
The encoder is required for control 1 out of n for displays that are designed for binary code. The encoder converts 1 of n into dual code. Description Order number Encoder 1 out of 15 common anode incl. Micro-Match cable 10 poles, 250 mm ..
Part number: 261
The Encoder 1 out of 31 is needed with the SM 84 for reproduction of 16 up to 31 announcements with control 1 out of n. The Encoder converts 1 out of n signals to dual code...
Part number: 264
An impulse converter can be added to a SCHAEFER display. It  converts serial pulses to dual code...
Part number: 265
Relay for switching higher loads, e. g. lift car illumination...
Part number: 371
Transponders with key function are available in four variants:ISO-Card “KeyCard”key ring pendant “KeyTag”key ring pendant “BlueTag”key ring pendant “StrongTag”All four variants have identical functions. Every transponder (electronic key) is a unique specimen with a non-recurring and unchangeable ide..
Part number: 372
Transponders with key function are available in four variants:ISO-Card “KeyCard”key ring pendant “KeyTag”key ring pendant “BlueTag”key ring pendant “StrongTag”All four variants have identical functions. Every transponder (electronic key) is a unique specimen with a non-recurring and unchangeable ide..
Part number: 263
The Uni-Wandler is a universal converter which can be combined for example with the acoustic systems or with the displays...
Part number: DC-Entkoppler
The DC Decoupler is connected upstream the Rainbow Button type RB 42 2M XI. In normal operation, the emergency call button thus runs via the standard power supply. In case of a power failure the emergency call button will be fed via the emergency power supply.For the permanent display of elevator da..
Part number: DC-Entkoppler F
The DC Decoupler is connected upstream the Rainbow Button type RB 42 2M XI. In normal operation, the emergency call button thus runs via the standard power supply. In case of a power failure the emergency call button will be fed via the emergency power supply. For the permanent display of elevator ..
Part number: Klapprosette (Profilhalbzylinder, Aluminium)
..
Part number: Klapprosette (Profilhalbzylinder, Kunststoff)
..
Brand: SCHAEFER Part number: 013576
..
Part number: 420
Protection against accidental operation...
Brand: SCHAEFER Part number: 013051
Protection against accidental operation...
Brand: SCHAEFER Part number: 013050
Protection against accidental operation...
Brand: SCHAEFER Part number: 011498
Protection against accidental operation...
Part number: 438
Protection against accidental operation...
Part number: 437
Protection against accidental operation ..
Part number: 434
Protection against accidental operation. ..
Part number: 433
Protection against accidental operation...
Part number: 439
Protection against accidental operation...
Brand: SCHAEFER Part number: 1000047
For MFD 332 S, MFD 332 P, MFD 544 S and MFD 544 P...
Part number: 1004216
Disinfection dispenser with touchless sensor automatic.Stand consisting of a 6mm thick aluminum composite panel (36.5x134 cm) and a 4mm thick powder coated base.Disinfectant dispenser with built-in sensor for touchless operation. For indoor or covered outdoor use.Trip protection thanks to extremely ..
Part number: HQ 56
Structure-borne noise converter for haptic acknowledgement...
Part number: IF 99 Triple
IF Triple is employed for fixture pre-wiring. The entire fixture can be supplied via D-Sub connectors. Many controller-specific pin assignments are realized; apart from that, D-Sub cables with “open ends” can be supplied. IF 99 comes with female connectors type MicroMatch for ten stops and five spec..
Part number: IF 99 V
IF 99 is employed for fixture pre-wiring. The entire fixture can be supplied via D-Sub connectors. Many controller-specific pin assignments are realized; apart from that, D-Sub cables with “open ends” can be supplied. IF 99 comes with female connectors type MicroMatch for ten stops and five special ..
Part number: IF Pult
IF Pult is employed for Pulttableau (desk-shaped fixture) pre-wiring. The entire fixture can be supplied via D-Sub connectors. Many controller-specific pin assignments are realized; apart from that, D-Sub cables with “open ends” can be supplied. IF Pult comes with female connectors type MicroMatch f..
Brand: SCHAEFER Part number: 004289
With help of the insertion tool that allows the flexible braided wire easily and comfortably into the socket of the insulation displacement connector, to be pressed in the installation element itself.Only for plugs:Connector 2p AWG 26-28 (003215)Connector 3p AWG 26-28 (011007)Connector 4p ..
Part number: 009102
Transponders with key function are available in four variants:ISO-Card “KeyCard”key ring pendant “KeyTag”key ring pendant “BlueTag”key ring pendant “StrongTag”All four variants have identical functions. Every transponder (electronic key) is a unique specimen with a non-recurring and unchangeable ide..
Part number: MCODE-8569214730
Magnet switch for retrofitting a position indicator according to EN 81-70. Ideally suited for modernisation of installations with lift controllers that do not have an output of floor signals. The function at one glance: At each stop in the shaft, magnets are being positioned. The magnet switch ..
Brand: SCHAEFER Part number: 010179
Identification of exit floor level...
Part number: 415
Identification of exit floor level...
Brand: SCHAEFER Part number: 013033
Identification of exit floor level..
Brand: SCHAEFER Part number: 013032
Identification of exit floor level...
Brand: SCHAEFER Part number: 016077
Identification of exit floor level...
Brand: SCHAEFER Part number: 016076
Identification of exit floor level. ..
Brand: SCHAEFER Part number: 011785
Identification of exit floor level...
Brand: SCHAEFER Part number: 011225
Identification of exit floor level...
Showing 1 to 50 of 75 (2 Pages)