Part number: 191
Modular dot matrix display with 50 mm height of characters...
Part number: 189
Modular dot matrix display with 50 mm height of characters...
Part number: 187
Modular dot matrix display with 50 mm height of characters...
Part number: 134
Universal voice announcement devide to announce floor information and special information.
The device has 2 internal loudspeakers, stereo output and 14 inputs, 13 of these are freely configurable.
Background musik can be played...
Part number: 343
The hands-free speakerphone EA-LMK70B serves as loudspeaker-microphone combination in the car fixture. It is equipped with a connection to the power supply of the system and a connection for the emergency call button. It is also possible to connect the techhnical alarm and/or the pictograms accordin..
Part number: 342
The remote emergency call system Easy-Alarm consists of the basic device Easy-Alarm EA-8-DPX _ and the hands-free speakerphone EA-LMK70B. The automatic dialling and announcing device Easy-Alarm is connected to an analogue telephone line. The system is available in three variants: EasyAlarm Elev..
Part number: 338
F-H uni and F-H2 uni are simple analogue communication systems for establishment of communications. The system consists of a handset fot the machine room or the porter's lodge and a hands-free speakerphone LMK which is installed in the lift car. The simple caraint F-H uni consists of one handset and..
Part number: 340
The handset is equipped with a loudspeaker and a microphone on the inside.By lifting of the handset a communication will be established to the car immediately. This communication will be terminated by hanging up the handset. If two handsets are used (F-H2 uni), both of them serve for establishing a ..
Part number: 222
Digital display with 35 mm height of characters...
Part number: 174
Dot Matrix Display with 35 mm height of characters and 40 mm height of arrows...
Part number: 175
Dot Matrix Display with 35 mm height of characters...
Part number: 126
The PG 42 will create 1, 2 or 3 tones once a signal is at the input.
The polarity (common anode or cathode) can be adjusted via a jumper.
Volume and tone pitch can be adjusted via tact switch...
Part number: 127
The PG 56 will create 1, 2 or 3 tones once a signal is at the input.
The polarity (common anode or cathode) can ve adjusted via a jumper.
Volume and tone pitch can be adjusted via tact switch...
Part number: 124
Speaker 42 is a Loudspeaker that can be connected to different SCHAEFER products...
Part number: 125
The PG 56 will create 1, 2 or 3 tones once a signal is at the input. The polarity (common anode or cathode) can be adjusted via a jumper. The volume can be adjusted via a potentiometer and the tone pitch can be adjusted via a tact switch...
Part number: 203
The Speaker 56 (50 Ohm) is suitable for products that require a high-impedance speaker. It has an impedance of 50 ohms...