Menu
Your Cart

Acoustic

 

Part number: 121
The AQ creates two short beeps once a button is pushed. With 3-wire technology the AQ will only sound if the call was accepted by the controller. When pushing an already confirmed button the AQ will also sound (see EN 81-70 (D), chart 4). The volume is adjustable via a potentiometer...
Part number: 123
The AQ-Ruf is especially designed for landing fixtures (call up and down). It creates a sound once a button is pushed.If an already acknowledged button is pushed again, the AQ will also sound again.The AQ-Ruf is suitable for common anode/common cathode and for 3-wire and 4-wire technology.Attention:..
Part number: 122
Serves for uncoupling buttons having a diode...
Part number: 134
Universal voice announcement devide to announce floor information and special information. The device has 2 internal loudspeakers, stereo output and 14 inputs, 13 of these are freely configurable. Background musik can be played...
Part number: 137
Software for configuration of DVM 70 / DVM 70 V2.0. System requirements MS Windows® XP/Vista/7/8/10 MS .NET Framework 3.5 min. 256 MB RAM Resolution min. 1024 × 768 pixel DVD drive..
Part number: 138
Different signals of the controller can be simulated with the simulation kit. Via the 16 switches of the switch box, the signals can be driven with common cathode or anode. The contacting is carried out in a time-saving manner via spring pins. The DVM 70 simulation kit contains a power supply, a swi..
Part number: 126
The PG 42 will create 1, 2 or 3 tones once a signal is at the input. The polarity (common anode or cathode) can be adjusted via a jumper. Volume and tone pitch can be adjusted via tact switch...
Part number: 127
The PG 56 will create 1, 2 or 3 tones once a signal is at the input. The polarity (common anode or cathode) can ve adjusted via a jumper. Volume and tone pitch can be adjusted via tact switch...
Part number: 125
The PG 56 will create 1, 2 or 3 tones once a signal is at the input. The polarity (common anode or cathode) can be adjusted via a jumper. The volume can be adjusted via a potentiometer and the tone pitch can be adjusted via a tact switch...
Part number: 128
Voice announcement intercom with one text; for example to notify people that are mobile restricted, when a call button is pushed and when the lift is out of order. The announcement text can be changed through replacing the memory chip (pluggable IC). The SP 42 has two individual entries OR combined ..
Part number: 129
Voice announcement intercom with one text; for example to notify peole that are mobile restricted, when a call button is pushed and when lift is out of order. The announcement text can be changed through replacing the memory chip (pluffable IC). The SP 56 has two individual entries OR combined entri..
Showing 1 to 12 of 33 (3 Pages)
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.