Menu
Your Cart

AQ - Acoustic Acknowledgement

AQ - Acoustic Acknowledgement
AQ - Acoustic Acknowledgement
AQ - Acoustic Acknowledgement
AQ - Acoustic Acknowledgement
AQ - Acoustic Acknowledgement
AQ - Acoustic Acknowledgement
AQ - Acoustic Acknowledgement
AQ - Acoustic Acknowledgement

The AQ creates two short beeps once a button is pushed. With 3-wire technology the AQ will only sound if the call was accepted by the controller. When pushing an already confirmed button the AQ will also sound (see EN 81-70 (D), chart 4). The volume is adjustable via a potentiometer.

Fixing
Welding studs M3 × 8
Connectivity
Screw terminal 3 poles 0.1 - 1 mm²
Screw terminal 3 poles AWG 26 - 28
Electrical data
Power supply 12 - 30 V DC
Stand-by current 12 mA
Operating current 50 mA
Polarity
Common anode or common cathode X
Acoustic properties
Frequency 2600 Hz
Sound pressure (0.3 m distance) 90 dB(A)
Volume adjustable via a potentiometer X
Other
Temperature range 0 - +65 °C

3-wire technology

3-wire technology (common anode)

...

The acknowledgement signal from the controller must not exceed 1 V.

3-wire technology (common cathode)

...

The acknowledgement signal from the controller must not be more than 1 V below  the supply voltage.



4-wire technology

4-wire technology (common anode)

...

4-wire technology (common cathode)

...

AQ – Module for acoustic acknowledgement of operation of a control device according to EN 81-70. Polarity common anode or common cathode; power supply 12 V … 30 V DC. Volume adjustment via potentiometer. Faceplate mounting by welding studs.

AQ - Acoustic Acknowledgement
  • 0.1 - 1 mm²
  • AWG 26 - 28

Downloads

We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.